Skip to content

Mr. Petey's Workshop

thinker, tinkerer, maker, Jack of all trades

  • Home
  • Mr. Petey’s Library
  • Gallery
  • About wMw
  • CLI Cheatsheet

Category: LED

First post of the New Year – not really, just kidding’

My prayers go out to the good people at PCBway.com that helped make this project possible as well as other effected. And anyone effected by the outbreak.

The first post of the New Year and it is covering my (last … the rest of the story. . . “First post of the New Year – not really, just kidding’”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

6 February, 202013 February, 2020 wrightmacNo Comments

Simple, scrolling, RTC clock

The other night I was puttering around, looking in my box of goodies to see what I brought to play with. I usually grab a few items and then see what inspires me along the way. Tonight it is two … the rest of the story. . . “Simple, scrolling, RTC clock”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

30 August, 201911 September, 2019 wrightmacNo Comments

Winding down the week

An update on the plethora of project I have going on. 

First is the large WS2812B clock. This has taken a couple of twists and turns. I have all of the LEDs I need. The came in a sheet of … the rest of the story. . . “Winding down the week”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

27 July, 2019 wrightmacNo Comments

ItsyBitsy Time, Date, and Temp

ItsyBitsy: Simple Time, Date, and Temp
I am stewing over a clock project. It has been on my bucket list of projects to complete. I have made a couple in the past, but simple and using 7-segment displays. I have … the rest of the story. . . “ItsyBitsy Time, Date, and Temp”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

17 July, 201917 July, 2019 wrightmacNo Comments

Almost ready

 

I am trying to finish up this part of the project so I can get the board off to be made. The two parts I need are on order. If all goes well everything should come in about the same … the rest of the story. . . “Almost ready”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

30 May, 2019 wrightmacNo Comments

From breadboard to here ya’ go. . .

Early on in my adventures in the Arduino / micro controller world one of my goals has been to usher an idea from paper, to breadboard, to protoboard, to real PCB board. After a long night of soldering, I decided … the rest of the story. . . “From breadboard to here ya’ go. . .”

No tags for this post.

Related posts

  • No related posts.
Leave a comment

15 December, 201627 June, 2019 wrightmacNo Comments

  • About wMw
  • Colophon

Decode Theme by Macho Themes

Recent Posts

  • Off to the presses 15 January, 2021
  • Blinking 2020 – K.I.S.S. 29 December, 2020
  • Mr. Petey’s FreeNAS Project Log 7 October, 2020
  • Zip Bang there went another week. 30 July, 2020
  • Sidebar – A shiny penny that turns 18 July, 2020

what’s popular

amp (1) Apple (1) Arduino (1) arduino IDE (1) Art (5) Art Photography (1) audio (1) BAM (1) Binary Art (1) bsd (2) build (1) case (1) CircuitPython (1) Cisco (1) Design (3) ESP8266 (1) flower (1) freebsd (2) freenas (1) Generative Art (1) geometry (1) hardware (9) home improvement (1) home network (1) ItsyBitsy M4 Express (1) KiCAD (1) macOS (2) math (1) media center (2) nas (1) nature (1) Nature Photography (1) osmc (1) partsBin (1) Photographic Doddle (3) Photography (3) Project (7) Raspberry Pi (4) repair (1) review (1) software (4) voltmeter (1) WEATHER (1)
This site has a Let's Encrypt certificate installed!

Archives