What more can one say?
This was meant to be a one-off, lets just have some fun kind of project. I was once told if you don’t learn something new everyday it just wasn’t a day. And I did learn in my eagerness for some quick video gaming gratification.
I had been trolling through my parts box and thinking of a fun project to work on. Then I remembered two things. First was the ATTiny85 video games. I always have ATTinys laying around so this would be great. I checked the BOM and I had everything save the PCB boards and they are available on OSHPark. I even had a spare OLED screen in my display box. COOL. And, and, a way back I had an online bump in with Drew of OSHPark and he had sent me a gift certificate for boards. Excellent. I quickly put in my order and it was under $4.00 so still plenty left on the coupon to get my first PCB designed board done.
I placed the order and forgot about it for a while. After all of the slow boat from China orders I tend to forget about things once I order them, I can’t stand being obsessive over something that is just going to take its time. Anyhow, low and behold one day when I get home from work there is a little package from OSHPark. I quickly get into it and see the 3 pretty purple boards and my OSHPark sticker for the collection, just waiting for a quick trim with the Dremmel and then get populated.
When I wasn’t waiting for the boards I took the time to program a ATTiny85 and breadboard it up with the screen. I wanted to make sure the big parts were ready and working for when the boards showed up. I almost wired up buttons, but it was about 2:00am and it was time for some slumber.
I was giddy at work just itching to get home and put all of the parts together and play some Tetris. And to be honest it has been quite a while since I have played it. Alright already, all of the parts are laid out and the iron is hot.
There I go. It took about an hour to get it all soldered up. I was trying to be extra nice, and neat. While my soldering skills are markedly better than they were a year ago, practice makes perfect and I am still working towards that goal. Once it is done the big moment, time to slide in the battery. I rummage in the battery drawer and pull out a CR2032 and pop it in. And nothing.
Really, nothing. Take it out and make sure I have positive facing up, yup. One more try and nothing. I pulled out my multimeter and check the battery 2.1V. Doesn’t that figure and I wait another day as it is again about 1:30am’ish (I work second shift so tend to have late hours in the studio).
I grab a two pack early the next morning and try it again. NOTHING! Well shit and shoved in it Wilbur I am getting a little annoyed by this time. I pull out my meter again and start checking continuity and don’t find any issues. I put the battery back in and start checking my voltages. All the pins have power and reading at the correct levels. WTH?
I sit down and start doing a little web surfing while keeping a picture of the Pocket Tetris on my screen. What could be wrong? Well it is a funny little story about CAREFULLY checking what pins go where and which pins you have there after staring at one’s problem for a good long while. There was a dope slap and a DOH! involved when I saw it.
Now this simple, fun, quickie project will have to wait a little while longer. That was my only spare screen and I don’t have a solder sucker (yet). So while another slow boat makes its way here with new screens, with the CORRECT pinouts, and a solder sucker I have other projects to move onto. New high scores will have to wait for another day.