Mr. Petey's Workshop
  • Home
  • Mr. Petey’s Library
  • Gallery
  • About wMw
  • CLI Cheatsheet

Category: Arduino IDE

B.A.M. Update – It Lives!

11 September, 2019 wrightmac Arduino IDE, Art, Geometry, hardware, In Progress, partsBin, software

The past couple of nights I have been working towards having the BAM, a pintograph, up and drawing. Last night was the night; mostly.

I did run into one issue. The motor was not responding to control via the L293D, … the rest of the story. . . “B.A.M. Update – It Lives!”

Read more

B.A.M. update to the update

10 September, 2019 wrightmac Arduino, Arduino IDE, Art, Binary Art, hardware, In Progress, partsBin, Project, software

This is a quick update to the hardware for the BigArtMess (BAM). I was going to give it a little classier name, but I like it.

I was a stumped for a couple of days as what to use for … the rest of the story. . . “B.A.M. update to the update”

Read more

Simple, scrolling, RTC clock

30 August, 2019 wrightmac Arduino, Arduino IDE, Clock, hardware, LED, Project

The other night I was puttering around, looking in my box of goodies to see what I brought to play with. I usually grab a few items and then see what inspires me along the way. Tonight it is two … the rest of the story. . . “Simple, scrolling, RTC clock”

Read more

Crazy Clock Stories

30 July, 2019 wrightmac Arduino, Arduino IDE, Clock

I am working on a larger clock project mentioned here before and it has finally moved up in the queue to being worked on.

The plan is to have 72 WS2818 LEDs to mark the minutes and hours. Each minute … the rest of the story. . . “Crazy Clock Stories”

Read more

SweetPea’s Pretty Blinking Lights, The Beginning

22 June, 2019 wrightmac Arduino IDE, ESP8266, hardware, In Progress, KiCAD, partsBin, PCB, Project

Here is the latest project (shinny penny) that caught my eye. I have been working through this one there seems to be a new idea at each step. 

Idea and planning:
My daughter wanted some colored blinking lights for her … the rest of the story. . . “SweetPea’s Pretty Blinking Lights, The Beginning”

Read more

My Valentine

9 February, 2018 wrightmac Arduino, Arduino IDE, Art, ATTiny, Design, hardware, software

My Wife puts up with all of my fussing and tinkering, so this year I decided to put some of it to good use. To show her how much I care and hey, I can do tinkering for her too. … the rest of the story. . . “My Valentine”

Read more

From breadboard to here ya’ go. . .

15 December, 2016 wrightmac Arduino, Arduino IDE, ATTiny, hardware, LED, Uncategorized

Early on in my adventures in the Arduino / micro controller world one of my goals has been to usher an idea from paper, to breadboard, to protoboard, to real PCB board. After a long night of soldering, I decided … the rest of the story. . . “From breadboard to here ya’ go. . .”

Read more

Recent Posts

  • TrueNAS 29 August, 2022
  • My NeXT Lego project 27 August, 2022
  • Friday Surprise 9 April, 2022
  • Keweenaw County History 7 April, 2022
  • S.S. Castledore 27 March, 2022

what’s popular

amp (1) Apple (1) Arduino (1) Art (9) audio (1) backup (1) BAM (1) bsd (2) build (1) cartography (1) Cisco (1) compute module 4 (1) Design (5) ESP8266 (1) freebsd (2) freenas (1) geekworm mini carrier board (1) hardware (16) history (2) home network (1) in progress (1) KiCAD (2) Lego (1) Life (1) macOS (3) maps (1) maritime (1) media center (6) music (1) nas (2) NEXT (1) osmc (1) partsBin (1) Photographic Doddle (3) Photography (5) Project (14) Raspberry Pi (7) retropi (1) RP2040 (1) software (5) teensy (1) truenas (1) voltmeter (1) WEATHER (1) wiiu (1)
This site has a Let's Encrypt certificate installed!

Archives

©2023 Mr. Petey's Workshop | WordPress Theme by Superb WordPress Themes